Beamz Showbar

BeamZ SHOWBAR

The ultimate SHOWBAR kit containing 6 effects mounted on a DMX T-bar. The SHOWBAR is a pair of LED butterfly effect lights, a pair of LED pars, a powerful green and red laser and a strobe effect. The T-bar contains 4 built-in 1W high power white LEDs to create an amazing strobe effect. The T-bar can be controlled in a 2-channel easy DMX setting, 9 and 18 or 30-channel fully customizable setup. The T-bar is also equipped with an IR sensor for controlling on distance by remote control. You can also use the wireless foot-controller to simply swap between auto mode or sound activated mode. Link multiple units together with IEC-connector and DMX. The SHOWBAR can be mounted on a 38mm stand or you can use the mounting brackets on both sides to mount it to the ceiling.

2x PAR Cans with each 6x 8W LED 4-in-1 RGB-UV
2x Butterfly with each 4x 3W RGBW
4x 1W White strobe effect
Laser Red/Green 70/100mW
DMX and stand-alone mode
2, 9, 18 or 30 DMX channels
Master/slave synchronization
Sound activated with adjustable sensitivity
Auto mode with adjustable speed
Pre programmed shows
DMX in-/output via 3-pin XLR
IEC-connector in-/output
Control panel with LED display
Wireless footcontrol
IR-Remote control
Complete with bag
Supplied without stand

Brand Beamz
Lightsource Single colour LED, 4-in-1 LED
LED Colours Red, Green, Blue, White, Ultra Violet
LED Power 8W
Quantity of LEDs 12
LED Power:Strobe 1W
Quantity of Strobe LEDs 4
Laser Red 100mW @ 650nm
Laser Green 70mW @ 532nm
DMX Channels 2, 9, 18, 30
DMX Connector 3-pin XLR
Modes Automatic programs, DMX
Power Supply 100-240VAC 50/60Hz
Dimensions (L x W x H) 1200 x 220 x 400mm


Kaina tik 539eur

Išrašome sąskaitas - faktūras
Visoms prekėms suteikiama 12 mėnesių garantija
Pristatymas visoje LIETUVOJE NEMOKAMAS

www.magnetola.lt